LASER TOOLS

Models fitted with steel pins with rubber O-rings to protect the fork cap. 8 x 3.5mm pins 39mm PCD Machined from T6 aluminium Can be used with a 1/2"D ratchet or a 24mm ring spanner Equivalent to OEM 88713.

MV Agusta wheel nut, Rear 56mm 12pt with Front 26mm 12 pt  for front wheel fixing x 1/2""D Manufactured from Aluminium T6 alloy.

Application: Ducati 1199R/S 2014 fitted with Öhlins type forks fitted with steel pins with rubber O rings to protect the fork cap: 8 x 2.

3/8"D. Made from 7075 Aluminium. Rubber cover prevents damage to the steering stem nut. OEM 88713.1058 Fits 4v Superbikes | Multistrada | Hypermotard and most Ducati's from 1992.

Dual sized 41mm/46mm x 1/2"D Manufactured from Aluminium. Max. Torque 320Nm For use on alloy wheel nuts only.

The castle nut socket are all manufactured from medium carbon steel that has been heat treated then chrome plated.

Size: 374mm x 170mm x 2.4mm. For draining or refilling. Manufactured from lightweight aluminium with rubber coating.

Cranked spout funnel designed to access hard to reach areas, such as motorcycle engine oil fillers, car brake and clutch master cylinders and van master cylinders, particularly useful for those positioned at the back of the engine bay.

Ducati OEM 88713.3465 1/2"D or 27mm Hex 8pt x 4.0mm steel pins Manufactured from non marking POM material Application: Ducati Multistrada Öhlins electronic shock absorbers    

Applications: Ducati 1199 and Hypermotard fitted with Marzocchi forks (2012-2014) fitted with steel pins with rubber O-rings to protect the fork cap.

The castle nut socket are all manufactured from medium carbon steel that has been heat treated then chrome plated.

For the rear swinging arm pivots Two keys required, one on each side of the bike. One to hold and one to slacken.

Made from 7075 aluminium. Light and strong. Essential tool. 30mm fits rear wheel of GT100 | 28mm fits front wheel 748 | 916 | 998 | 996 | Hypermotard | Multistrada | Allmonsters | Supersport | superclassic.

The castle nut socket are all manufactured from medium carbon steel that has been heat treated then chrome plated.

Application front and rear wheels on many Ducati, Hypermotard, all Monsters/Supersports/Sports Classic plus any Ducati with a2 5mm or 28mm front axle Sizes include 55mm (bi-hex) with 28mm (6pt) insert,  46mm 6pt/12pt, 41mm 6pt/12pt, 30mm  (6pt)  28mm (

Dual sized 41mm/46mm x 1/2"D Manufactured from SCM440 alloy steel, manganese phosphate finish Ideal for over tightened or seized fixings.

This low profile socket is designed to be used with an impact gun to remove both rear and front fixings that have been over tightened or partially seized 1/2"D Combined 55mm Bi-Hex and 30mm single hex wheel socket Manufactured from SCM440 alloy steel Appl

Application: all Ducati Multistrada 1200 models fitted with Sachs type forksSlotted to accomodate the fork wiring harness.

The castle nut socket are all manufactured from medium carbon steel that has been heat treated then chrome plated.

Designed to undo the Camshaft Pulley fixings Drive 19mm Manufactured from Stainless Steel Other sizes available: 28mm, 25mm Applications Ducati:  749, 999, 1098, 848 and 1198 series    

Designed to undo the Camshaft Pulley fixings Drive 19mm Manufactured from Stainless Steel Other sizes available: 24mm, 25mm Applications Ducati:  749, 999, 1098, 848 and 1198 series  

A special set of pliers for fitting O-ring style hose clips. Soft grip handle for added leverage.   A special tool for fitting ear clamps/compression clips.